Professional Repair Solutions By MK Service Center

Washing machine not starting

Is your washing machine filling up with too much water, or not enough? Both are problems, and both can have different causes. One thing that can cause this is the water-level sensing system. In some washing machines, a pressure switch and a small air tube are used to sense the water level. If the tube is damaged or blocked, or the pressure system is not working properly, the machine may get the wrong reading. This can lead to too much water or too little. But the water level is not always a fault. Some washing machines adjust the amount of water according to the selected program and load. So if the machine looks like it is using less water than before, it may be normal for that particular cycle. If the machine is actually over-filling, turn off the water supply and don’t leave it running. Too much water can quickly become a bigger problem. If it is taking too little water, check the water tap, inlet hose and inlet filter as well. Low water pressure, a blocked filter or a bent hose can restrict the water coming into the machine. We see this type of problem on washing machines in Bangalore. The reason is not always the same, so the water supply and sensing system need to be checked before replacing any part. MK Service Center provides washing machine repair at home in Bangalore. Our technician checks the machine at your home and tells you what is causing the problem. Having the same problem? 📞 Call MK Service Center.

Loud Noises from the Washing Machine

That knocking sound that gets louder as the spin speed increases? It is usually a sign of worn drum bearings. The noise gets worse during high-speed spinning, and it will not go away on its own. But loud knocking can have other causes too. A single scrape or rattle is different — that is usually something stuck around the drum. We have pulled out coins, buttons, hair clips, and even bra wires from machines. Small metal objects create rattling or clanging sounds during a wash cycle. If your washing machine is making a noise it did not make before, do not keep running it. Every extra cycle can make the problem worse. Our technician checks the source of the noise first, finds the actual fault, and then recommends the right repair — no guesswork.

Washing Machine Vibration and Walking During Spin

Is your washing machine shaking badly or moving forward when it goes into spin? First, check if the machine is standing properly on the floor. If the feet are not adjusted correctly, the machine can shake a lot when the drum starts spinning fast. This is quite common, especially after moving or installing the machine. If the machine is newly installed, also check the transit bolts at the back. These bolts hold the drum in place while the machine is being transported. They need to be removed before using the washing machine. Still getting heavy vibration after checking these things? Then it may be an internal problem. We normally check the shock absorbers, suspension, drum movement and counterweights to find where the vibration is coming from. There is no point changing parts without checking the actual problem first. At MK Service Center, we provide washing machine repair at home in Bangalore. Our technician comes to your home, checks the machine and explains what needs to be repaired. You don’t need to carry a heavy washing machine to a service center. Is your washing machine shaking or moving during the spin cycle? 📞 Call MK Service Center.

Water Coming Out of the Detergent Drawer

Water should go into the detergent drawer and then into the drum. If you see it coming back out from the front of the drawer, something isn’t right. The first thing I’d check is the drawer itself. Take it out and look at the corners and the small holes inside. If you’ve been using the machine for a long time, you can often find old detergent stuck there. Powder and liquid detergent can build up over time, especially when the drawer isn’t cleaned regularly. Give the drawer a good wash and clean the inside area as well. A soft brush works fine for the stubborn bits. Also check how much detergent you’re using. More detergent doesn’t mean cleaner clothes. It can actually leave more residue behind. If you’ve cleaned the drawer and water is still coming out, don’t keep running the machine like that. The problem could be with the water entering the dispenser, an internal hose, or another part around the dispenser. We’ve seen this on different washing machines, and the fix isn’t always the same. The machine needs to be checked first. MK Service Center provides washing machine repair at home in Bangalore. Our technician can check the machine at your home and tell you what is causing the water to spill from the drawer. Having the same problem? 📞 Call MK Service Center.

Over-Filling or Under-Filling with Water

Is your washing machine filling up with too much water, or not enough? Both are problems, and both can have different causes. One thing that can cause this is the water-level sensing system. In some washing machines, a pressure switch and a small air tube are used to sense the water level. If the tube is damaged or blocked, or the pressure system is not working properly, the machine may get the wrong reading. This can lead to too much water or too little. But the water level is not always a fault. Some washing machines adjust the amount of water according to the selected program and load. So if the machine looks like it is using less water than before, it may be normal for that particular cycle. If the machine is actually over-filling, turn off the water supply and don’t leave it running. Too much water can quickly become a bigger problem. If it is taking too little water, check the water tap, inlet hose and inlet filter as well. Low water pressure, a blocked filter or a bent hose can restrict the water coming into the machine. We see this type of problem on washing machines in Bangalore. The reason is not always the same, so the water supply and sensing system need to be checked before replacing any part. MK Service Center provides washing machine repair at home in Bangalore. Our technician checks the machine at your home and tells you what is causing the problem. Having the same problem? 📞 Call MK Service Center.

Washing Machine Not Spinning Properly

Is your washing machine finishing the wash cycle but leaving the clothes soaking wet? Or does the drum just refuse to spin at all? The first thing to understand is that spinning and draining are linked. Most machines will not spin until the water is out. So a spin problem often starts as a drainage problem. A blocked filter, a kinked drain hose, or a drain pump with something jammed in the impeller will all stop the machine from spinning. If the machine drains normally and still will not spin, then the cause is usually something else. A stretched or broken drive belt is common on older machines. Worn motor brushes can also be the reason. On some models, a lid or door switch that is not confirming the machine is closed will stop the spin — the machine thinks the door is open, so it plays safe. We see this on front-load and top-load machines across Bangalore. The fix depends on what is actually causing it, so the machine needs to be checked before any part is replaced. MK Service Center provides washing machine repair at home in Bangalore. Our technician checks the machine at your home and tells you what is causing the spin problem. Having the same problem? 📞 Call MK Service Center.

When to Stop Using the Machine

There are three situations where you should stop using the machine and call us straight away. One — if you can smell burning. That can be a sign of an electrical or mechanical problem, and it is not worth risking. Unplug the machine and leave it. Two — if water is coming out onto the floor. Even a small leak can get worse fast, and water near electrics is dangerous. Turn off the tap and unplug it. Three — if the drum is knocking loudly during the spin. That can be caused by worn bearings, a suspension issue, or another mechanical problem. Running it more can make the problem worse. If any of these is happening, unplug the machine and give us a call. Do not wait for it to stop working completely. 📞 Call MK Service Center: +91 95382 74744 or message us on WhatsApp.